MARINE WELD

Part No. 8272

Description:

Formulated like our industrial-strength J-B WELD cold-weld, MARINE WELD cures as strong as steel, and is water- and weather-proof. It's impervious to saltwater, chemicals, oil, acids, and other corrosive materials, and tolerates extreme temperature fluctuations. Every boat afloat should carry MARINE WELD for quick and permanent repairs from surf board nicks to hull repairs.

How does it work?

MARINE WELD is packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel -- and with similar properties.

MARINE WELD is so versatile that it's even used by a marine science center to help mend the shells of sea turtles injured by boat propellers.

Properties (psi)
Tensile Strength:	3960
Adhesion:	1800
Flex Strength:	7320
Tensile Lap Shear:	1040
Shrinkage:	0.0%
Resistant to:	500° F

How to use it:

Use MARINE WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply MARINE WELD, and let it cure. That's all there is to it!

Like metal, MARINE WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. MARINE WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water. (print instruction sheet)

Uses

What does it bond to?

Virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous material.