J-B STIK
Part No. 8267-S
Description:
J-B Stik Weld is a hand kneadable, steel-reinforced epoxy putty adhesive/sealant tha will plug holes and make permanent repairs on wet and dry surfaces. It will even cure completely submerged in water or GASOLINE! Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply. J-B Stik will fully cure 20-30 minutes; and can be drilled, sanded, filed, tapped, machined, and painted. J-B Stik requires no tools or "prep time", and makes no mess.
How does it work?
Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply.
| Properties (psi) | |
|---|---|
| Tensile Strength: | 6,000 psi |
| Density: | 15.8 lb/gal |
| Compression Strength: | 14,000 psi |
| Shear Strength: | 700 psi |
| Hardness: | 75-85 psi |
| Resistant to: | 300° F |
| Modulus of Elasticity: | 6 x 105 psi |
Not recommended for use on manifolds, exhaust systems, and other engine components which normally operate at temperatures above 500° F.
How to use it:
Use J-B STIK as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply J-B STIK, and let it cure. That's all there is to it!
Like metal, J-B STIK can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. J-B STIK is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water. (print instruction sheet)
Uses
What does it bond to?
Virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous material.